{"title":"Lower Control Arms","description":"","products":[{"product_id":"1982-2002-camaro-firebird-rear-lower-control-arms-black-extreme-joint","title":"1982-2002 Camaro \/ Firebird Rear Lower Control Arms Black Extreme Joint (Part #23932)","description":"\u003cp\u003e\u003cstrong\u003ePart # 23932\u003c\/strong\u003e  |  \u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLess wheel hop • Sharper handling • Direct bolt-on • Powder coat finish options\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTired of wheel hop, unpredictable traction, and a rear end that moves when you hammer the throttle?\u003c\/strong\u003e Factory stamped arms and soft rubber bushings flex under load, robbing straight-line grip and making handling feel less predictable when it matters most.\u003c\/p\u003e\n\n\u003cp\u003eFactory stamped arms and soft rubber bushings flex under load, reducing traction and consistency. These arms use J\u0026amp;M Extreme Joint bushings - a steel inner ball captured in hard synthetic elastomer outer cups - to reduce deflection while maintaining bind-free articulation during cornering.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Joint bushings\u003c\/strong\u003e - Steel inner ball captured in hard synthetic elastomer outer cups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBind-free articulation\u003c\/strong\u003e - Maintains rear suspension movement during body roll without polyurethane bind\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRound tubular steel construction\u003c\/strong\u003e - Stronger in bending and torsion than factory stamped arms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced wheel hop and axle deflection\u003c\/strong\u003e - More straight-line grip than soft factory rubber\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on for 1982-2002 Camaro and Firebird rear lower control arms\u003c\/li\u003e\n\u003cli\u003ePowder coat finish options for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1982-2002 Chevrolet Camaro and Pontiac Firebird (F-Body).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication notes:\u003c\/strong\u003e Rear lower control arms with Extreme Joint bushings. Select your powder coat finish from the product options before adding to cart.\u003c\/p\u003e\u003ch2\u003eWhy Choose J\u0026amp;M\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreet-smart bushing strategy\u003c\/strong\u003e - Performance control without the bind common in basic polyurethane upgrades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e – Designed and manufactured by J\u0026amp;M Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium materials and construction\u003c\/strong\u003e – Built with the hardware and fabrication standards serious performance applications require\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlant the rear end and put power to the pavement.\u003c\/strong\u003e Select your powder coat finish above and add to cart.\u003c\/p\u003e","brand":"J\u0026M Products","offers":[{"title":"Black","offer_id":49407553044707,"sku":"23932-B","price":203.83,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":49407553077475,"sku":"23932-R","price":203.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/3616\/0739\/files\/Camaro-Extreme-Joint-Control-Arms-Black.jpg?v=1784063588"},{"product_id":"1982-2002-camaro-firebird-on-car-aluminum-adjustable-lower-control-arms-rod-rod-ends","title":"1982-2002 Camaro \/ Firebird On Car Aluminum Adjustable Lower Control Arms Rod \/ Rod Ends (Part #23962)","description":"\u003ch2\u003e1982-2002 Camaro \/ Firebird on-car Aluminum Adjustable Lower Control Arms Rod \/ Rod Ends\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart # 23962\u003c\/strong\u003e  |  \u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLess wheel hop • Sharper handling • Direct bolt-on • Multiple finish options\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePerformance control arms for 1982-2002 Chevrolet Camaro and Pontiac Firebird (F-Body) replace factory arms with stronger hardware and reduced bushing deflection for improved traction and predictable handling\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFactory stamped arms and soft rubber bushings flex under load, reducing traction and consistency. These arms use J\u0026amp;M spherical bearings and rod ends built to the same sintered bronze liner specification to reduce deflection and improve response Part # 23962.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJ\u0026amp;M bearing specification\u003c\/strong\u003e - Spherical bearings and rod ends manufactured to J\u0026amp;M's premium specification for strength and durability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSintered bronze liner\u003c\/strong\u003e - Not standard PTFE; stronger sintered bronze liner for durability and smooth travel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e52100 heat-treated ball\u003c\/strong\u003e - With 4340 chrome-moly bearing race\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1982-2002 Chevrolet Camaro and Pontiac Firebird (F-Body).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication notes:\u003c\/strong\u003e Race Rod\/Rod on-car adjustable aluminum Control Arms Select your finish option from the product options before adding to cart.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose J\u0026amp;M\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e – Designed and manufactured by J\u0026amp;M Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium materials and construction\u003c\/strong\u003e – Built with the hardware and fabrication standards serious performance applications require\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlant the rear end and put power to the pavement.\u003c\/strong\u003e Select your finish above and add to cart.\u003c\/p\u003e","brand":"J\u0026M Products","offers":[{"title":"Black Powder-Coat","offer_id":49407553143011,"sku":"23962-B","price":208.85,"currency_code":"USD","in_stock":true},{"title":"Red Powder-Coat","offer_id":49407553175779,"sku":"23962-R","price":208.85,"currency_code":"USD","in_stock":true},{"title":"Bare Aluminum","offer_id":49407553208547,"sku":"23962","price":199.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/3616\/0739\/files\/23961-23962-1000_29598119-357d-4574-8f72-3b05f5109ff3.jpg?v=1784063590"},{"product_id":"j-and-m-products-1982-2002-camaro-firebird-lower-control-arms-3-piece-poly-ball-bushings","title":"J\u0026M Products 1982-2002 Camaro\/Firebird Lower Control Arms - 3-Piece Poly-Ball Bushings (Part #23851)","description":"\u003ch2\u003e1982-2002 Camaro\/Firebird Lower Control Arms - 3-Piece Poly-Ball Bushings\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart # 23851\u003c\/strong\u003e | \u003cstrong\u003eMade in the USA by J\u0026amp;M Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLess wheel hop • Sharper handling • Direct bolt-on • Powder coat finish options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTired of wheel hop, unpredictable traction, and a rear end that moves when you hammer the throttle? Factory stamped arms and soft rubber bushings flex under load, robbing straight-line grip and making handling feel less predictable when it matters most. These lower control arms replace that factory compliance with a 3-piece Poly-Ball bushing setup - hard inner synthetic elastomer ball with soft outer cups - for tighter, more consistent axle control without suspension bind.\u003c\/p\u003e\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.75-inch round steel tubing\u003c\/strong\u003e - Reduced control arm flex versus factory stamped arms\u003c\/li\u003e\n\u003cli\u003eCNC machined and laser-cut, pulse-welded construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-piece synthetic elastomer Poly-Ball bushings\u003c\/strong\u003e - Hard inner ball with soft outer cups for bind-free articulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced bushing bind\u003c\/strong\u003e - Maintains rear suspension articulation during body roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess wheel hop and axle deflection\u003c\/strong\u003e - Improves straight-line traction versus soft rubber bushings\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on replacement for 1982-2002 Camaro and Firebird rear lower control arms\u003c\/li\u003e\n\u003cli\u003ePowder coat finish options for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1982-2002 Chevrolet Camaro and Pontiac Firebird (F-Body).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication notes:\u003c\/strong\u003e Rear lower control arms with 3-piece Poly-Ball bushings. Select your powder coat finish from the product options before adding to cart.\u003c\/p\u003e\u003ch2\u003eWhy Choose J\u0026amp;M\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreet-smart bushing strategy\u003c\/strong\u003e - Performance control without the bind common in basic polyurethane upgrades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e -- designed and manufactured by J\u0026amp;M Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium materials and construction\u003c\/strong\u003e -- built to the hardware and fabrication standards serious performance applications require\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlant the rear end and put power to the pavement.\u003c\/strong\u003e Select your powder coat finish above and add to cart.\u003c\/p\u003e","brand":"J\u0026M Products","offers":[{"title":"Black","offer_id":49407556190435,"sku":"23851-B","price":135.18,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":49407556223203,"sku":"23851-R","price":135.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/3616\/0739\/files\/23851-3-Piece-Control-Arms-Red-copy.jpg?v=1784063633"},{"product_id":"j-and-m-products-1982-2002-camaro-firebird-on-car-adjustable-lower-control-arms","title":"J\u0026M Products 1982-2002 Camaro\/Firebird On-Car Adjustable Lower Control Arms (Part #23813)","description":"\u003ch2\u003e1982-2002 Camaro \/ Firebird On-Car Adjustable Lower Control Arms\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart # 23813 | Made in the USA by J\u0026amp;M Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLess wheel hop - Sharper handling - Direct bolt-on - Powder coat finish options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTired of wheel hop, unpredictable traction, and a rear end that moves when you hammer the throttle? Factory stamped arms and soft rubber bushings flex under load, robbing straight-line grip and making handling feel less predictable when it matters most.\u003c\/p\u003e\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn-car adjustable design\u003c\/strong\u003e - Tune pinion angle and rear geometry without removing the arms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.25-inch DOM steel tubing\u003c\/strong\u003e - Stronger than factory stamped arms\u003c\/li\u003e\n\u003cli\u003eCNC machined and pulse-welded construction with rosette welds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSynthetic elastomer fluted bushings\u003c\/strong\u003e - Greaseable on-car fittings for long service life\u003c\/li\u003e\n\u003cli\u003eLess wheel hop and improved rear suspension response\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on for 1982-2002 Camaro and Firebird\u003c\/li\u003e\n\u003cli\u003ePowder coat finish options for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1982-2002 Chevrolet Camaro and Pontiac Firebird (F-Body).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication notes:\u003c\/strong\u003e On-car adjustable rear lower control arms with synthetic elastomer bushings. Select your powder coat finish from the product options before adding to cart.\u003c\/p\u003e\u003ch2\u003eWhy Choose J\u0026amp;M\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreet-smart bushing strategy\u003c\/strong\u003e - Performance control without the bind common in basic polyurethane upgrades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e - Designed and manufactured by J\u0026amp;M Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium materials and construction\u003c\/strong\u003e - Built to the standards serious performance applications require\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlant the rear end and put power to the pavement.\u003c\/strong\u003e\u003c\/p\u003e","brand":"J\u0026M Products","offers":[{"title":"Black","offer_id":49407556911331,"sku":"23813-B","price":218.82,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":49407556944099,"sku":"23813-R","price":218.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/3616\/0739\/files\/23813-Black.jpg?v=1784063647"},{"product_id":"j-and-m-products-1982-2002-camaro-firebird-on-car-adjustable-lower-control-arms-3-piece-poly-ball-bushings","title":"J\u0026M Products 1982-2002 Camaro\/Firebird On-Car Adjustable Lower Control Arms - 3-Piece Poly-Ball Bushings (Part #23814)","description":"\u003ch2\u003eJ\u0026amp;M Products 1982-2002 Camaro\/Firebird On-Car Adjustable Lower Control Arms – 3-Piece Poly-Ball Bushings\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart # 23814 | Made in the USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOn-car adjustable • Less wheel hop • Sharper handling • Powder coat finish options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFactory rubber bushings are soft enough to allow suspension articulation, but that softness lets the rear axle move under acceleration and braking – causing wheel hop. Standard polyurethane bushings fix the hop but bind up during cornering, straining the chassis torque boxes. J\u0026amp;M's 3-piece Poly-Ball bushing uses a hard inner synthetic elastomer ball with soft outer cups to control axle movement without introducing suspension bind, and the on-car adjustable length lets you dial in pinion angle without pulling the arms off the car.\u003c\/p\u003e\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn-car adjustable design\u003c\/strong\u003e - Tune pinion angle without removing the arms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.25-inch DOM steel tubing\u003c\/strong\u003e - Reduced control arm flex versus factory stamped arms\u003c\/li\u003e\n\u003cli\u003eCNC machined and pulse-welded construction with rosette welds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-piece synthetic elastomer Poly-Ball bushings\u003c\/strong\u003e - Hard inner ball with soft outer cups for bind-free articulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced bushing bind\u003c\/strong\u003e - Maintains rear suspension articulation during body roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess wheel hop and axle deflection\u003c\/strong\u003e - Improves straight-line traction versus soft rubber bushings\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on for 1982-2002 Camaro and Firebird\u003c\/li\u003e\n\u003cli\u003ePowder coat finish options for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1982-2002 Chevrolet Camaro and Pontiac Firebird (F-Body).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication notes:\u003c\/strong\u003e On-car adjustable rear lower control arms with 3-piece Poly-Ball bushings. Select your powder coat finish from the product options before adding to cart.\u003c\/p\u003e\u003ch2\u003eWhy Choose J\u0026amp;M\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreet-smart bushing strategy\u003c\/strong\u003e - Performance control without the bind common in basic polyurethane upgrades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e - Designed and manufactured by J\u0026amp;M Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium materials and construction\u003c\/strong\u003e - Built to the hardware and fabrication standards serious performance applications require\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlant the rear end and put power to the pavement – select your powder coat finish above and add to cart.\u003c\/p\u003e","brand":"J\u0026M Products","offers":[{"title":"Black","offer_id":49407557075171,"sku":"23814-B","price":244.17,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":49407557107939,"sku":"23814-R","price":244.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/3616\/0739\/files\/23813-Black_4d658858-4666-41f2-a2bc-a14530a126a5.jpg?v=1784063649"},{"product_id":"1982-2002-camaro-firebird-on-car-adjustable-lower-control-arms-poly-rod-combo","title":"1982-2002 Camaro \/ Firebird On Car Adjustable Lower Control Arms Poly \/ Rod Combo (Part #23965)","description":"\u003ch2\u003e1982-2002 Camaro \/ Firebird on-car adjustable Lower Control Arms Poly \/ Rod Combo\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart # 23965\u003c\/strong\u003e  |  \u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLess wheel hop • Sharper handling • Direct bolt-on • Powder coat finish options\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eReplace those weak factory stamped lower control arms with J\u0026amp;M Products extreme-duty tubular on-car adjustable arms.\u003c\/strong\u003e These are a direct bolt-on replacement that minimizes wheel hop, improves cornering, lowers ETs, and helps track consistency. J\u0026amp;M proprietary spherical rod ends manufactured to our specifications let the rear suspension articulate bind-free, making this a strong upgrade for street, strip, and autocross use\u003c\/p\u003e\n\n\u003cp\u003eTired of wheel hop, unpredictable traction, and a rear end that moves when you hammer the throttle? Factory stamped arms and soft rubber bushings flex under load, robbing straight-line grip and making handling feel less predictable when it matters most Part # 23965. Made in the USA by J\u0026amp;M Products.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJ\u0026amp;M bearing specification\u003c\/strong\u003e - Spherical bearings and rod ends manufactured to J\u0026amp;M's premium specification for strength and durability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSintered bronze liner\u003c\/strong\u003e - Not standard PTFE; stronger sintered bronze liner for durability and smooth travel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e52100 heat-treated ball\u003c\/strong\u003e - With 4340 chrome-moly bearing race\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1982-2002 Chevrolet Camaro and Pontiac Firebird (F-Body).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication notes:\u003c\/strong\u003e Poly-Rod Adjustable Lower Arms Select your powder coat finish from the product options before adding to cart.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose J\u0026amp;M\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e – Designed and manufactured by J\u0026amp;M Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium materials and construction\u003c\/strong\u003e – Built with the hardware and fabrication standards serious performance applications require\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlant the rear end and put power to the pavement.\u003c\/strong\u003e Select your powder coat finish above and add to cart.\u003c\/p\u003e","brand":"J\u0026M Products","offers":[{"title":"Black","offer_id":49407562481891,"sku":"23965-B","price":268.62,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":49407562514659,"sku":"23965-R","price":268.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/3616\/0739\/files\/23965R-1800.jpg?v=1784063723"},{"product_id":"j-and-m-products-1982-2002-camaro-firebird-non-adjustable-lower-rear-control-arms-steel-usa-made","title":"J\u0026M Products 1982-2002 Camaro\/Firebird Non-Adjustable Lower Rear Control Arms - Steel, USA Made (Part #23811)","description":"\u003ch2\u003e1982-2002 Camaro\/Firebird Non-Adjustable Lower Rear Control Arms\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart # 23811\u003c\/strong\u003e | \u003cstrong\u003eMade in the USA by J\u0026amp;M Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLess wheel hop • Sharper handling • Direct bolt-on • Powder coat finish options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFactory stamped arms and soft rubber bushings flex under load, reducing traction and consistency. These J\u0026amp;M lower control arms use 1.75-inch round tubing and greaseable synthetic elastomer bushings in place of the factory stampings and rubber, reducing deflection so power gets to the pavement instead of flexing the suspension.\u003c\/p\u003e\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.75-inch round steel tubing\u003c\/strong\u003e - Replaces flex-prone factory stamped arms\u003c\/li\u003e\n\u003cli\u003eCNC machined and laser-cut, pulse-welded construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProprietary synthetic elastomer bushings\u003c\/strong\u003e - Greaseable on-car fittings for serviceable performance bushings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced wheel hop\u003c\/strong\u003e - Less axle deflection than soft factory rubber bushings\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on replacement for 1982-2002 F-Body rear lower control arms\u003c\/li\u003e\n\u003cli\u003ePowder coat finish options for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1982-2002 Chevrolet Camaro and Pontiac Firebird (F-Body).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication notes:\u003c\/strong\u003e Non-adjustable rear lower control arms with greaseable synthetic elastomer bushings. Select your powder coat finish from the product options before adding to cart.\u003c\/p\u003e\u003ch2\u003eWhy Choose J\u0026amp;M\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreet-smart bushing strategy\u003c\/strong\u003e - Performance control without the bind common in basic polyurethane upgrades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e -- designed and manufactured by J\u0026amp;M Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium materials and construction\u003c\/strong\u003e -- built to the hardware and fabrication standards serious performance applications require\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlant the rear end and put power to the pavement.\u003c\/strong\u003e Select your powder coat finish above and add to cart.\u003c\/p\u003e","brand":"J\u0026M Products","offers":[{"title":"Black","offer_id":49407575785699,"sku":"23811-B","price":108.58,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":49407575818467,"sku":"23811-R","price":108.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/3616\/0739\/files\/23811-Control-Arms-Red.jpg?v=1784063627"},{"product_id":"1982-2002-camaro-firebird-on-car-steel-adjustable-lower-control-arms-rod-rod-ends","title":"1982-2002 Camaro \/ Firebird On Car Steel Adjustable Lower Control Arms Rod \/ Rod Ends (Part #23962S)","description":"\u003ch2\u003e1982-2002 Camaro \/ Firebird on-car Steel Adjustable Lower Control Arms Rod \/ Rod Ends\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart # 23962\u003c\/strong\u003e  |  \u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLess wheel hop • Sharper handling • Direct bolt-on • Powder coat finish options\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTired of wheel hop, unpredictable traction, and a rear end that moves when you hammer the throttle?\u003c\/strong\u003e Factory stamped arms and soft rubber bushings flex under load, robbing straight-line grip and making handling feel less predictable when it matters most.\u003c\/p\u003e\n\n\u003cp\u003eLess wheel hop • Sharper handling • Direct bolt-on • Powder coat finish options Part # 23962. Made in the USA by J\u0026amp;M Products.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJ\u0026amp;M bearing specification\u003c\/strong\u003e - Spherical bearings and rod ends manufactured to J\u0026amp;M's premium specification for strength and durability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSintered bronze liner\u003c\/strong\u003e - Not standard PTFE; stronger sintered bronze liner for durability and smooth travel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e52100 heat-treated ball\u003c\/strong\u003e - With 4340 chrome-moly bearing race\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1982-2002 Chevrolet Camaro and Pontiac Firebird (F-Body).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication notes:\u003c\/strong\u003e Race Rod\/Rod on-car adjustable aluminum Control Arms Select your powder coat finish from the product options before adding to cart.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose J\u0026amp;M\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e – Designed and manufactured by J\u0026amp;M Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium materials and construction\u003c\/strong\u003e – Built with the hardware and fabrication standards serious performance applications require\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlant the rear end and put power to the pavement.\u003c\/strong\u003e Select your powder coat finish above and add to cart.\u003c\/p\u003e","brand":"J\u0026M Products","offers":[{"title":"Black","offer_id":49407575851235,"sku":"23962S-B","price":199.64,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":49407575884003,"sku":"23962S-R","price":199.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/3616\/0739\/files\/Steel-Adjustable-Race-Arms-Red.jpg?v=1784063627"},{"product_id":"j-and-m-products-synthetic-ptfe-silicone-waterproof-bushing-grease-4-pack-part-261005","title":"J\u0026M Products Synthetic PTFE Silicone Waterproof Bushing Grease - 4-Pack (Part #261005)","description":"\u003cp\u003e\u003cstrong\u003e4-Pack | Part # 261005\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProtect your polyurethane and synthetic elastomer suspension bushings with J\u0026amp;M Products' high-performance synthetic silicone bushing grease. Formulated with sub-micron PTFE (Teflon), it delivers superior, long-lasting protection for all your suspension assembly and maintenance needs.\u003c\/p\u003e\n\u003ch2\u003eWhy It's the Right Choice\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePTFE-infused formula\u003c\/strong\u003e — tiny PTFE particles reduce friction and wear for smooth, quiet operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof and non-melting\u003c\/strong\u003e — a 'super sticky' formula that stays in place, preventing rust, corrosion, and water washout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemically resistant\u003c\/strong\u003e — won't react with or degrade polyurethane or elastomer bushings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide temperature range\u003c\/strong\u003e — maintains performance and consistency across extreme conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-staining\u003c\/strong\u003e — clean formula for professional-looking results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvenient 4-pack\u003c\/strong\u003e for multiple applications or future maintenance.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMade in the USA.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply to all synthetic elastomer or polyurethane suspension bushings and sleeves during installation or maintenance for quiet, long-lasting performance.\u003c\/p\u003e","brand":"J\u0026M Products","offers":[{"title":"Default Title","offer_id":49407583289571,"sku":"261005","price":6.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/3616\/0739\/files\/hotpart-grease-packs.png?v=1784063745"}],"url":"https:\/\/hotpart.com\/collections\/camaro-camaro-firebird-f-body-1982-1992-rear-lower-control-arms.oembed","provider":"J\u0026M Products \/ Hotpart.com","version":"1.0","type":"link"}